ZTE ZXA10 C300 GPON or EPON OLT equipment, Optical Line Terminal,generator room netcore, with the front screw plates

ZTE ZXA10 C300 Gpon OLT equipment. Low price and high quality. It supports all kinds of FTTx application modes

The following picture is the built-in fans at the top of OLT:

The following two pictures are 2 uplink boards and 1 universal interface board.

The model of uplink board is GUFQ, and including one uplink module of each board; the universal interface board model is CICG, there are 11 Ethernet ports totally.

 The two pictures below are the control boards, the model is SCXM.

 These two pictures are the 8-port GPON board, GTGO and power board,the model of power board is PRWG.

Also you can select the EPON card, ETGO model, the price is USD100.00 lower than the GPON one:

The following is the inner fans from the OLT:

 Cables: the black one is power cable, the yellow one is earth cable, and also one RJ-45 first turn 9-pin RS-232 female network cable:

C300 GPON OLT configuration:

2 power cards, the model is PRWG.

Double uplink cards, the model is GUFQ, including one module for each board. 

One universal interface board, CICG, there are 11 Ethernet ports on it.

Exchange control boards, 2 pieces, the model is SCXM.1 piece 8-port GPON card, the model number is GTGO, including 8 modules.

Two black power cables; an RJ-45 first turn 9-pin RS-232 female network cable; one RJ-45 cable;

You can select  ETGO according to your requirements. it is USD100.00 less than the GPON one:

http://www.aliexpress.com/store/product/ZTE-8-ports-EPON-board-for-C300-OLT-ETGO-board-with-8-EPON-modules/208276_521950270.html 

The following information is about the accessories:

 Two power cables; An RJ-45 first turn 9-pin  RS-232 female network cable;  An RJ-45 network cable; screws. 

The power rating is DC,48---60V,20A, the following link is for the power supply, you need to buy seperately:

http://www.aliexpress.com/store/product/Original-Emerson-power-supply-in-cabinet-for-Huawei-OLT-or-ZTE-OLT-48V-20A-power-adapter/208276_622864530.html 

ZXA10 C300 is big OLT equipment with high density, high bandwidth and scalable office end equipment of passive optical access. It supports all kinds of FTTx application modes.

Addressing all types of FTTx network requirements with the most appropriate technology, ZTE launched ZXA10 C300, world's first unified platform supporting GPON, EPON and P2P as well as the emerging next generation IEEE 10GEPON and FSAN/ITU-T NG-PON in one platform.

Features

Future-proof Platform Lowering TCO and Preserving Initial InvestmentsLarge Capacity and High Density to Meet Requirements of Big CO and Higher Site SavingFull Redundancy Support to Ensure Carrier-class ReliabilityIncreased Revenues with Higher End-users Quality of ExperienceTraditional TDM Support Provide a Low-cost Way for FMC and Network Migration Powerful QoS and Security Control to Ensure Multiple Service Provision Efficient OAM Process with Easy Management and MaintenanceGreen Product Assure a Green Communication World

ZXA10 C300 next-generation optical access platform won the InfoVision Green Broadband Award at Broadband World Forum Europe (BBWF Europe) 2010 , it is the world's first green, converged, multi-service, all-optical, large-capacity and high-density access platform that is designed for high-end markets, meets existing technical application requirements, and can be simply upgraded as new technologies develop.

Original equipment from ZTE factory.

Please contact us to confirm everything before you pay, thanks!

ZTE ZXA10 C300 GPON or EPON OLT equipment, Optical Line Terminal,generator room netcore, with the front screw plates